FREQUENTLY ASKED QUESTIONS
1. |
Does ADA Solutions meet ADA, ADAAG, and PROWAG requirements? |
Yes. Since the mid 1980’s ADA Solutions has been manufacturing the highest-quality detectable warning products in the world. All of ADA Solution’s products adhere to ADAAG and PROWAG requirements. |
|
|
Top of page |
2. |
What size detectable warnings are required by the Americans with Disabilities Act Accessibility Guidelines (ADAAG)? |
The current guideline requires the detectable warning surface to begin 6” to 8” from the back of the curb extending 24” or 2 feet in the direction of travel. To learn more about the various regulations related to detectable warning surfaces please visit our Government Regulations Page, or call us anytime at (800) 372-0519. |
|
|
Top of page |
3. |
|
Yes. We offer two solutions. First, you can take our FREE online course. Or, for larger firms, we offer on-site learning sessions. Please call (800) 372-0519 to arrange a site visit by one of our AIA Approved Facilitators. |
|
|
Top of page |
4. |
|
ADA Solution’s uses the most advanced homogenous glass and carbon reinforced composite to create a colorfast and U.V. stable product. Each truncated dome is fiberglass reinforced for enhanced durability. The color is uniform throughout, and does not rely on a surface coating (paint) to achieve color stability. |
|
|
Top of page |
5. |
Should reinforcing bar be installed through the holes in the sides of the cast-in-place product? |
No. The larger holes in the sides of the embedment flanges of the cast-in-place product are designed to let concrete flow through to securely anchor the product in the fresh concrete. |
|
|
Top of page |
6. |
What is needed to install the surface mounted detectable warning tiles? |
Fasteners and adhesive are included with each tile. Purchase a quality sealant (Sonneborn NP1 or equivalent) to seal the entire perimeter of installed tactile to finish the installation. |
|
|
Top of page |
7. |
|
ADA Solution’s brochure contains detailed installation instructions for all of our detectable warning systems. Ask your local distributor or call (800) 372-0519 to request a brochure.
The following detailed instructions are also available for download: |
|
|
Top of page |
8. |
What are the dome spacing dimensions of ADA Solution’s detectable warnings? |
ADA Solutions is the only detectable warning manufacturer to offer both 1.67” and 2.35” center to center spacing. Please call (800) 372-0519 to discuss available sizes, colors and dome spacing. |
|
|
Top of page |
9. |
What is the height of the truncated dome in ADA Solution’s detectable warning products? |
ADA Solution’s manufactures all of our truncated domes to measure .20” |
|
|
Top of page |
10. |
|
ADA Solutions prides itself on maintaining the highest levels of inventory in the (6) most popular colors used nationwide: Yellow, Clay-Red, Brick-Red, Black, Gray and Blue should be available for immediate shipping.
Please call (800)372-0519 with any questions. |
|
|
Top of page |
11. |
|
Yes. ADA Solutions manufactures custom colors. Please call us at (800)372-0519 to discuss your custom color needs. |
|
|
Top of page |
12. |
|
No. ADA Solution’s uses the most advanced composite materials that are not affected by extreme low or high temperatures.
For additional information refer to our Product Test Data |
|
|
Top of page |
13. |
Will salt from snow removal affect ADA Solution’s detectable warning tiles? |
No. Lab testing shows that salt will not affect the composite material used to manufacture ADA Solution’s detectable warning tiles. In fact, chewing gum and even spray paint can be removed without staining ADA Solution’s detectable warning tiles. |
|
|
Top of page |
14. |
Can ADA Solution’s surface mounted tile be mounted on asphalt? |
No. Due to the instability of the asphalt surface we do not recommend it for the application of surface mounted detectable warning tiles. For a long term solution, we recommend pouring a concrete footer and installing ADA Solution’s cast-in-place or replaceable cast-in-place system. |
|
|
Top of page |
15. |
|
“Sound on cane” is an important element of ADA Solution’s detectable warning tile design. The visually impaired, and blind, rely on audible cues from their cane as they sweep it in front of them. ADA Solution’s composite material and proven design features enhance sound attenuation making them the best choice for true detectability. |
|
|
Top of page |
16. |
Can I cut ADA Solution’s detectable warning tiles? If so, does it affect the warranty? |
ADA Solution’s cast-in-place, retrofit, and radius systems can be cut in the field. Use a continuous rim diamond blade or a 32 tooth carbide tip blade to cut the tiles. We do not recommend cutting the straight replaceable tiles. Please call (800)372-0519 for more information. |
|
|
Top of page |
17. |
|
ADA Solution’s detectable warnings are sold through local distribution. Please call (800)372-0519 with any questions.
Find a distributor near you by searching on our Dealer Locator page |
|
|
Top of page |
18. |
How can I get ADA Solution’s approved for use in my city or town? |
Please contact us at (800)372-0519 and we will submit our products to the necessary department for approval. |
|
|
Top of page |
19. |
When cutting a retrofit tile I cut off the preformed fastener dome. What should I do? |
Use a half-inch countersink bit to create a recess in any of the existing truncated domes. Install the fastener as provided. Please call (800)372-0519 with any questions. |
|
|
Top of page |
20. |
I need to install 200’ of continuous retrofit detectable warning tiles. What about the bevel? |
We recommend cutting the bevel off and measure to keep the domes properly spaced. Then simply caulk the joint between the tiles.
Please call (800)372-0519 to speak with speak with an experienced professional. |
|
|
Top of page |
21. |
I need to install 300’ of continuous replaceable detectable warning tiles. Should I space them? |
Installation of successive replaceable tactile units requires specific installation procedures. Please read through our Replaceable Installation Instructions or call (800)372-0519 with any questions. |
|
|
Top of page |
22. |
Does temperature affect the installation of the surface mounted tile? |
Yes. The adhesive requires temperatures of 30 degrees F and rising to allow for proper curing. |
|
|
Top of page |
23. |
Which ADA Solution’s detectable warning system should I use for my project? |
For new construction we recommend the cast-in-place, or cast-in-place replaceable systems. The cast-in-place and cast-in-place replaceable systems allow for an earlier completion date - saving you time and money. The surface mounted system is used to retrofit existing concrete ramps.
Please call (800)372-0519 to discuss the best detectable warning solution for your current and future jobs. |
|
|
Top of page |
24. |
What tools are required to install the cast-in-place systems? |
You will require a rubber mallet, as well as edging and finishing tools. Also, a razor knife for removing the plastic protective covering after installation. Please read through our Cast-In-Place Installation Instructions or call (800)372-0519 with any questions. |
|
|
Top of page |
25. |
|
ADA Solution’s radius replaceable and radius retrofit systems are designed to save you time and money. No more wasted material or manpower. To learn more about our line of Radius Products please visit our Radius Products Page, or call (800)372-0519 for more radius system information. |
|
|
Top of page |
Home | Products | Distributors | Transit | Gov't Regulations | Approvals | Contact | Quote | FAQ | About
ADA Solutions, Inc., P.O. Box 3 • North Billerica, MA 01862 • Tel: (800) 372-0519 • Fax: (978) 262-9125
Copyright © 2011 ADA Solutions, Inc. All rights reserved.
